Instrumex

Product Details:

The Gillian^® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display holds calibration for 30 days, even with atmospheric changes. While Gillian air sampling pumps are known for their strength, the back-pressure capabilities of the Gillian 5000 are the highest in the industry for any personal sampling pump.

Features:

• Up to 5 LPM
• Highest back-pressure capability
• Programmable
• Live flow display
• NiMH battery
• EN1232 - Type P compliant

 

Product Details:

Product Specifications

Product Details:

Motion Detection

Detect and measure up to 3 levels of activity (active, stationary, inactive) of each worker, ensuring sample integrity

Bluetooth Connectivity

• Remotely monitor an air sampling pump up to 5 meters (16.4 ft.) away
• No disturbance of the worker
• Stay in unrestricted areas while workers are in restricted areas 
• No need to suit up

CONNECT Mobile App

• Apple Mobile App Compatibility:
  • iPod Touch, iPhone, and iPad
  • iOS 10 through iOS 13
  • 64 bit
• Android Mobile App Compatibility:
  • OS Version: 6 or higher
  • 64 bit
  • Bluetooth 4.0 or higher
• Start, stop or pause the sample remotely
• Monitor and graph flow rate, sample run time, and volume remotely
• Perform real-time remote assessments:
  • Identify if cassette is overloading
  • Identify if filter media is detached
• Sample audits provide the following on a smart phone or tablet:
  • Report of current conditions
  • Screen shot of current conditions
  • Time stamp
  • GPS coordinates (actual address)
  • Pump number
  • E-mailable report
• Check the status of multiple pumps in the same area

=> Go to Gilian CONNECT tab to download PC software

Product Details:

Compact personal Sampling Pump for high flow application

Product Specifications

Product Details:

The ergonomically designed 5 LPM Air Sampling Pumps are the tough, dependable and high performance based equipment that are used for air sampling. The pump offer flow rate of 5000 cc/min and saves time and money with overcoming many sampling errors. No special battery maintenance is required and their is no risk of data loss due to battery failure.

Features

• Integrity of Data
• Easy-to-read large backlit LCD display confirms setup parameters
• Predicted run time
• Lockable keypad
• Intuitive menu and keypad operation
• Multi-function docking station
• Constant Flow 20-5000cc/min without external adaptors. Constant Pressure 1-5,000 cc/min without external adaptors
• One-third smaller than traditional personal air sampling pumps
  • 4.3 x 2.4 x 2.4 inches
  • 11.0 x 6.1 x 6.1 cm
• Lightweight
  • 21 oz / 580 g
• Maximizes comfort through streamlined design
• Rugged enclosure, durable keypad and robust internal components
• High back-pressure capability
  • High-flow: up to 40" H₂O
  • Low-flow: up to 25" H₂O
• Samples particulates, vapors, gases and metal fumes
• All major hazardous area and electrical approvals
• Intrinsically Safe - IECEx, ATEX, CSA, FM

Technical Specifications

Product Details:

Industrial Health and Safety Instruments by Sensidyne
Constant Flow Air Sampling Pump
• External Filter HousingClear External filter housing allows animmediate visual inspection of filter’scondition.• Flow Fault & Test IndicatorsFlow Fault indicator lights up if unitoperates outside ± 5% of set flow rate.Battery Test indicator lights up whenbattery can provide a minimum of 8 hoursof operation over operating range.• Basic, Clock, & Program ModelsBasic model is easy to use. Clock modelprovides elapsed-time clock display.Program model provides auto start-stopand delayed start times up to 9999 mins.• Optional Low Flow ModulesConstant Low Flow module allowssampling from 5-500 cc/min. ConstantPressure (Multiflow) Module allowssampling from 1-750 cc/min.

Description UL & ATEX P/NGilAir-3 R Sampling Pump, Basic 800485-171GilAir-3 RC Sampling Pump, Clock 800508-171GilAir-3 RP Sampling Pump, Program 800510-171GilAir-3 R Sampling Pump, Basic, Starter Kit, 120V 800485-171-1201GilAir-3 RC Sampling Pump, Clock, Starter Kit, 120V 800508-171-1201GilAir-3 RP Sampling Pump, Program, Starter Kit. 120V 800510-171-1201GilAir-3 R Sampling Pump, Basic, Starter Kit, 230V 800485-171-2301GilAir-3 RC Sampling Pump, Clock, Starter Kit, 230V 800508-171-2301GilAir-3 RP Sampling Pump, Program, Starter Kit. 230V 800510-171-2301Single-Station Charger (120 VAC) 298-0006-01Single-Station Charger (230 VAC) [euro plug] 401097-1Five-Station Charger (120 VAC) 811-0818-USFive-Station Charger (230 VAC) - Euro Plug 811-0818-EUReplacement Battery Pack 783-0008-03Low Flow Module, Constant Flow, Blue 800518Low Flow Module, Multi-Flow, Blue 800519

Product Details:

 LFS-113 Dual Mode Low Flow Sampling Pump

The Low Flow Air Sampling Pump is the powerful pocket size air sampler available with two sampling modes. These modes can be selected by the user as per the requirement.

The Two Modes:

Constant Flow Control Mode : In this mode the flow is controlled within the set limit if +5% of flow.

Multi Flow Control Mode : This mode allows the collection of multiple samples simultaneously.

The sampler allows unmatched performance with wide flow range and high pressure back capacity. The sampler is available in basic as well as clock models in both Global and US versions.

The Global version of this pocket sized sampler is now available with memory-free NiMH battery.

 

Approvals

• US Version UL-US with NiCd Battery
• Global Version CSA, C-US, ATEX with NiMH Battery

Product Details:

Quad Mode Universal Air Sampling Pump

Product Specifications

Product Details:

The Soap Bubble Calibrators are meant for the calibration of air sampling pumps. These are in compliance with ISO 17025 standards and offers standard accuracy and performance validation while sampling pump air flows ranging from 1 cc to 30 LPM.

Temperature Limits

• Operating Temperature : 5 to 35C (41 to 95F)
• Storage Temperature : 0 to 50C (32 to 122F)

Electrical

• DC Power Source : Internal Battery Pack
• AC Power Source : Continuous operation through adapter/charger
• Battery Charge Time : 14 Hrs.
• Expected Battery Life : over 300 charge/recharge cycles
• Transmission Link : RS-232
• Interface Connectors : Charger Jack (2.1 mm barrel jack), Printer Jack (DB-25), Sensor Jack - Wet Cell (DB-9)

Technical Specifications

Product Details:

• External Filter HousingClear External filter housing allows animmediate visual inspection of filter’scondition.

• Flow Fault & Test IndicatorsFlow Fault indicator lights up if unitoperates outside ± 5% of set flow rate.Battery Test indicator lights up whenbattery can provide a minimum of 8hours of operation over operating range.
• Basic, Clock, & Program ModelsBasic model is easy to use. Clock modelprovides elapsed-time clock display.Program model provides auto start-stopand delayed start times up to 9999 mins.

• Optional Low Flow ModulesConstant Low Flow module allowssampling from 5-500 cc/min. ConstantPressure (Multiflow) Module allowssampling from 1-750 cc/min.

Description UL & ATEX P/NGilAir-5 R Sampling Pump, Basic 800883-171GilAir-5 RC Sampling Pump, Clock 800885-171GilAir-5 RP Sampling Pump, Program 800884-171GilAir-5 R Sampling Pump, Basic, Starter Kit, 120V 800883-171-1201GilAir-5 RC Sampling Pump, Clock, Starter Kit, 120V 800885-171-1201GilAir-5 RP Sampling Pump, Program, Starter Kit. 120V 800884-171-1201GilAir-5 R Sampling Pump, Basic, Starter Kit, 230V 800883-171-2301GilAir-5 RC Sampling Pump, Clock, Starter Kit, 230V 800885-171-2301GilAir-5 RP Sampling Pump, Program, Starter Kit. 230V 800884-171-2301Single-Station Charger (120 VAC) 298-0006-01Single-Station Charger (230 VAC) [euro plug] 401225-1Five-Station Charger (120 VAC) 811-0818-USFive-Station Charger (230 VAC) - Euro Plug 811-0818-EUReplacement Battery Pack 783-0009-02Low Flow Module, Constant Flow, Blue 800518Low Flow Module, Multi-Flow, Blue 800519

Product Details:

Established in 1990, Instrumex is an ISO 9001:2015 registered company and one of the largest manufacturers and suppliers of Environmental Pollution Monitoring Instruments. Our strength lies not in just developing the instruments but providing a Total Solution for your pollution monitoring requirement. At INSTRUMEX, our passion is Continuous Research & Development of new technologies in Pollution Monitoring Instruments.

Features

• 32 Bit ARM Processor
• 5.7" TFT Touch Screen Display
• Long Life Sensors
• Sampling pump with 4100 mmWC suction capacity
• Unit programmable in ppm & mg/m3
• 4400 mAH Lithium Battery for 12 hours operation
• 160 set of data storage facility
• RS 232 port for data logging
• User selectable 18 fuels with 2 user programmable fuels
• Printer interface

Product Details:

We manufacturers best quality Continous Emission Monitoring System.
Gas Sample in flue gases passes through the probe, primary filtration, sampling ball valve and secondary filtration in the chassis, then reaches to measuring cell. After analysis the density and humidity of all components the sample gas will be drained through sampling pump.
By controlling sampling ball valve and back-blowing solenoid valve, the system can regularly back –blow to the probe. It can also realize the regular calibration of the analyzer by controlling and calibration solenoid valve.

Product Details:

Calibrate air sampling pumps to set & verify flow rates with complete confidence - anywhere you work. Lightweight and easy to operate, the Go-Cal Pro is the must-have precision flow meter for OEHS professionals.ACCURACY
•  1% Accuracy across the Entire Range of Flow Rates in 3 Instruments:

    » Low Flow:  5-600 cc/min » Standard Flow:  600-5000 cc/min» High Flow:  4-30 LPM

Product Details:

FEATURES: • Traditional thermal fog machine technology • Performance oriented design • Refers to the droplet size (between 20–30 micrometers) • Heavy enough to penetrate these "air-curtains" as well as light enough to be evenly distributed. 

Product Details:

Dual Mode Operation • Flow Fault Indicator • Timer Option (DC Model) • Battery Check LED

Product Specifications

Product Details:

Model No : IPM971

The Portable Dust Sampler is used for monitoring particulate and gaseous pollutants to analyze inorganic gases like SO₂, NOX. NH₃, CS₂, hydrocarbons and solvent vapor. These gases are analyzed in compliance with Factory Act 1948 (amended in 1987-88). The sampler helps in regulation of workplace environment and to limit the exposure from harmful chemicals and pollutants.

The small and light in weight sampler is available with a compact aluminum case. It is fitted with a diaphragm pump, pinch valve and rota meter for efficient flow adjustment. It is a micro controller based instrument with timer based functionality and comes with digital display timer and sampling devices.

Application

• It determines the general background levels
• It checks and identifies pollutants in environment and their sources
• For the assessment of personal exposures
• For checking efficiency & effectiveness of control measures

Devices used for sampling

• Acrylic filter holder
• Suspended particulate matter available in two sizes 25 min and 47 mm dia.
• 2 impinges to analyze inorganic gases such as SO₂, NOX. NH₃ and CS₂
• Activated charcoal tubes for the analysis of hydrocarbons and solvent vapor

Product Details:

A compact, versatile Low Volume Air Sampler with wide flow range of 0-5LPM & 0-500mLPM for monitoring gaseous and particulate pollutants in ambient air and the work - space environment to analyze inorganic gases such as SO2, NOx. Nh3, CS2, Hydrocarbons, Solvent Vapor, Benzene & to determine Suspended Particulate Matter (SPM) as per the factory act 1948 amended in 1987-88 provided for regulation of monitoring of workspace environment and exposure of workmen to harmful pollutants and chemicals. This instrument is small, light in weight, mounted in a compact aluminium case and is fitted with a diaphragm pump, a rota meter and a pinch valve for flow adjustment. The instrument is a micro controller based unit for timer operated function of the system. It comes with a digital display timer and sampling devices.

Application:

• Determines the general background levels
• Checks & identifies pollutants in environment & their sources
• For the assessment of personal exposures
• For checking efficiency & effectiveness of control measures

Devices for sampling:

• Acrylic filter holder for what man filter paper to determine.
• Suspended particulate matter. These are available in two sizes i. E. 25min & 47 mm dia.
• 2 impinges to analyze inorganic gases such as SO2, NOx. NH3, CS2, Benzene (at low flow) etc.
• Activated charcoal tubes for analysis of hydrocarbons & solvent vapor.

Product Details:

GILIBRATOR-2® Diagnostic Calibration System

Primary standard accuracy and performance validation for sampling pump air flows from 1 cc to 30 LPM

Other details:

• Low Flow Wet Cell -
• Dimensions: 2”W x 4”H x 2.1”D (51W x 102H x 53mmD) Weight: 0.4 lbs. (.18 kg)
• Standard Flow Wet Cell -
• Dimensions: 2.5"W x 6"H x 2.6"D (64W x 152H x 66mmD) Weight: 0.82 lbs. (0.37 kg)
• High Flow Wet Cell -
• Dimensions: 3.5"W x 8.1"H x 3.7"D (89W x 206H x 94mmD) Weight: 2.26 lbs. (1.02 kg)
• Flow Range,Accuracy -
• Low Flow Wet Cell, 1 - 250 cc/min., ±1% of reading accuracy; Standard Flow Wet Cell,
• 20cc to 6 LPM, ±1% of reading accuracy; High Flow Wet Cell, 2-30 LPM, ±1% of reading
• accuracy.
• Temperature Limits:
• Operating Temperature: 5 to 35C (41 to 95F);
• Storage Temperature: 0 to 50C (32 to 122F)
• Electrical:
• DC Power Source: Internal Battery Pack;
• AC Power Source: Continuous operation through adapter/charger;
• Battery Charge Time:14 Hrs.;
• Expected Battery Life: over 300 charge/recharge cycles;
• Transmission Link:RS-232;
• Interface Connectors: Charger Jack (2.1mm barrel jack), Printer Jack (DB-25), Sensor Jack - Wet Cell (DB-9)